Save Big With New Insulation Rebates
Your Utility May Pay Up to 95% of Your Insulation Project
Local utility rebates may cover up to 95% of the cost of your insulation upgrades!
Arrow Insulation is a preferred contractor for:
Check My Rebate Elegibility
Find out how much you qualify for today!
Check My Rebate Elegibility
Check My Rebate Elegibility
Why Homeowners Are Upgrading Insulation Right Now
These improvements can help:
Work With a Certified Utility Contractor
Arrow Insulation is certified with local utilities, allowing us to:
Verify your rebate eligibility
Complete approved energy-saving upgrades
Submit the paperwork to your utility
Help you receive the maximum rebate available
Our team has helped thousands of homeowners across Western Washington upgrade their homes while taking advantage of available incentives.
Serving Homeowners Across Northwest Washington
We proudly provide insulation services in:
- Seattle
- Bellevue
- Everett
- Mount Vernon
- Bellingham
- and surrounding communities.
If you live in Western Washington, there’s a good chance your home qualifies for insulation rebates.
Find Out How Much You Can Save
The fastest way to see what rebates your home qualifies for is a quick consultation with our team. It takes just a few minutes. You may be surprised how much your utility will cover.
Rebate Chart
 | ||
Weatherization Type | Rebate Value | Potential Savings (Total Project Cost) |
Attic insulation: from R11 or less to R49 or more | $1.75 per sq ft | Up to 65% |
Wall insulation: from R0 to R13 or more | $2.50 per sq ft | Up to 95% |
Floor insulation: from R11 or less to R30 or more | $2.50 per sq ft | Up to 95% |
Prescriptive air sealing (attic and/or floor) | $0.20 per sq ft | Up to 60% |
Prescriptive duct sealing and insulation: from R0 to R11 or more | Up to $1,000 per home | Up to 70% |
Duct sealing only | Up to $550 per home | Up to 50% |
| ||
Attic Insulation 1 & 4 | Insulation must be equal to or greater than R-60, or cavity filled to R-49 Prior attic insulation must not exceed R-19 | $2.50/sqft |
Floor Insulation 1 & 4 | Insulation must be equal to or greater than R-30, or cavity filled to R-19 Prior floor insulation must not exceed R-11 | $2.50/sqft |
Wall/Sloped Ceiling Insulation 1 & 4 | Insulation must be equal to or greater than R-11, or cavity filled Prior wall insulation must not exceed R-4 | $5.00/sqft |
Duct Insulation 1&9 | Insulation must be equal to or greater than R-8 and must be reported in linear feet Prior duct insulation must not exceed R-0 | $2.50/sqft |
Duct Sealing | Requires a minimum of 30% of applicable ductwork is outside of conditioned space | $1,000 |
Prescriptive Air Sealing 1 & 4 | Only eligible with Attic Insulation installation. Must meet BPA specifications for attic and crawl space sealing. Attic insulation must be present. | $0.15/sqft |
Existing Home Bundle A 5 & 6 | Any two insulation measures performed at the same time with a minimum 1,000sqft total | $500 |
Insulation
Adding or upgrading insulation in your home helps eliminate cold air drafts, retain heat, and reduce noise — as well as significantly reduce your electric heating bills into the future.
Rebate: Up to $1 per square foot
Requirements:
Attic insulation must be R-19 or less to R-49
Floor insulation must be R-11 or less to R-30
Wall insulation must be R-0 to R-11
Must be installed by a PUD registered contractor
Duct Sealing
Did you know that leaky ducts in your HVAC system can lose about 25% of your heated and cooled air? Instead of making your living space more comfortable, improperly sealed ducts send the air into your crawl space, attic and garage — resulting in higher energy bills for you as your system works to keep up.
Rebate:
Single-family home: $5 per linear foot up to $450
Single-wide manufactured home: $200
Double- and triple-wide manufactured home: $400
Requirements:
Must be installed by a PUD registered contractor
